Gravity Screen Pro – On / Off v1.67(0929) Apk Full App

Gravity Screen Pro – On / Off v1.67(0929) Apk Full App

Gravity Screen Pro – On / Off v1.67(0929)

Requirements: Android 2.2+
Overview: This app turns automatically your screen off when you put your phone into your pocket or onto a table and turn the screen on when you take it out or up. No need to touch any button and you are ready to go.

Using your phone often? Tired of the On-Off switching?
This app turns automatically your screen off when you put your phone into your pocket or onto a table and turn the screen on when you take it out or up. No need to touch any button and you are ready to go.
HOW IT WORKS:
It monitors the orientation of the device through the gravity sensor. When your phone is pointing downward by its top, in a certain angle, it’s likely to be out of use. In this situation the proximity sensor is activated to determine if it is covered. If yes, the screen turns off because probably you placed the phone into your pocket or onto a table.
To keep the battery usage low the program turns on the proximity sensor only when it’s really necessary. Moreover, when it turns your screen off and the proximity sensor is covered it puts your phone into deep sleep state to save as much energy as possible.
MAIN FEATURES:
- Pocket Sensor: Recognizes if your phone is in your pocket. By turning your phone below the angle you set, it’ll prepare to turn the screen off.
- Table Sensor: Detects your phone is lying on a table and turns the screen off.
- Turn Screen On by Motion: If the screen is off and it’s facing up the device can be woken up by any movements, for example lift up by hand.
- Keep Screen On by Motion: It’s a Screebl like feature but it’s relying on the small movements you are doing by your hand while holding the phone. If small motions are detected while the screen is facing up the feature keeps the screen on because it can be suspected that the phone is held and probably you are reading something long. If the phone is steady the normal screen timeout will apply in any position you leave your device.
- Tasker, Llama, Locale supported by plug-in.
BATTERY USAGE:
It should be not significant. I experienced about 6 per cent extra consumption on the test device. However it can be much higher by often using the Turn Screen On by Motion feature. Thus, keep your phone face down if you want to save energy.
IMPORTANT:
On some devices (e.g. HTC One) the alarm clock is switched off by the app after it had gone off! Please check if it’s the case for you. If, yes, use a third party app, for example: https://play.google.com/store/apps/d…mClockPlusDock
SIDE NOTE:
- The app was not widely tested. Hopefully it will work fine for you. But, if you experience any issue or just have a question, please email me.
FREE vs. PRO VERSION
In the Pro version the screen can be turned on by motion up to 16 hours instead of 15 minutes. Also, in the Pro version the Table sensor is more accurate.

What’s news:
- – - v1.67 – - -
Fixed:
- small fixes (Lying Face Up, Headphone support)
- works on more Motorola devices
If the app does not work properly after the update, try to re-install it to solve the problem.

https://play.google.com/store/apps/details?id=com.plexnor.gravityscreenoffpro

Download From Zippyshare

How to Hack Windows Admin Password

Proactive System Password Recovery recovers many types of passwords instantly and without lengthy attacks, as well as displays hidden system information such as Product ID and CD Key.

The following passwords are quickly recovered with advanced attacks.

• Windows NT/2000/XP/2003/Vista/2008/WIndows 7 user passwords
• SYSKEY startup passwords
• Passwords stored in Domain Cached Credentials
• WPA-PSK passwords
• Remote assistance passwords
• Windows 9x passwords (from PWL-files)

Download

How to Hack Windows Admin Password using PC Login Now

Download the PC Login Now software and burn the ISO file to a CD.

Insert the PC Login Now disc into your CD/DVD/BD drive and then restart your computer. After the initial startup of your computer and loading of Linux is complete, click next to continue.

Now process is to “Select the SYSTEM” Select it and click next

Next, it lists all local Windows accounts in the system. Select the account you want to reset the password. Then, check on “password is empty” and click next.

is Administrator: if the account has the administrator privilege and rights.

password is empty: if the password of the account is empty or blank.

is disable: if the account has been disable due to the operation of administrator or the system rules.

is lockout: if the account has been locked due security breach such as too many unsuccessful login attempt.

password never expire: if the account has to set password on a specific expiry date or the password will expire after a set period.

It asks you if you want to reset another user. Select No.

Click OK to reboot the system

How to Break Syskey Password Windows 7 and Server 2008

1. Download Syskey Remover

2. You can write this image with any image burning software. We are using our traditional software Nero.
3. Now go to the system and boot form this CD.

Press Enter on boot options

This window bootable Linux scripts will search your entire hard disk and show all the available partitions on hard disk.

Press Enter

Press 1 and than Enter

Press Enter

Press 1 ( To reset the Password ) and than Enter

Press 2  ( To change the syskey status)  and then Enter

Press y and then Enter

Now, your syskey password will get removed

Now we will reset windows administrator password

Press 1 ( Edit user data & password) and then Enter

Type Administrator and then Enter

Press 1 (To clear the password) and then Enter

Press   !  sign and enter to come back on pervious menu.

Press  Q  (  For quit) and then Enter

Press y  ( To save the changes made so far ) and then Enter

Press N(For no more changes) and then Enter

Now press ALT + CTRL + DEL to restart the system

Hack Windows Password with the Help of Hiren’s Boot CD

Hiren’s BootCD is an ultimate solution to almost all your computer problems. It comes loaded with hell lot of tools.Each of them is powerful and can be really very helpful if used with caution. You can solve nearly all your PC problems like virus infection, hdd failure, data recovery, Hard disk partitioning, password recovery using this CD.

This CD consists of variety of tools like

• Antivirus Tools
• BIOS / CMOS Tools
• Browsers / File Managers
• FileSystems Tools
• Hard Disk Tools
• MBR (Master Boot Record) Tools
• MultiMedia Tools
• Ms Dos Tools
• Network Tools
• Optimizers
• Partition Tools
• Password Tools
• Process Tools
• RAM (Memory) Testing Tools
• Recovery Tools
• Registry Tools
• Remote Control Tools
• Security Tools
• Startup Tools
• System Information Tools
• Testing Tools
• Tweakers

Change Password with the Help of Hiren Boot CD

Download Hiren Boot CD

1. Enter “Offline NT/2000/XP/Vista/7 Password Changer”

With Up & Down keys select Offline ‘NT/2000/XP/Vista/7 Password Changer’ and press Enter.

Press ENTER

Press Enter Here

Press Enter

Press 1 for (Password Resetting) and then Press ENTER

Press 1  and then ENTER

Write (user name to be changed  for Password) and then ENTER

Press 1 (to clear Password) and then ENTER

Press Q ( to quit)and then ENTER

Press (!),and then ENTER

Press (y) and then ENTER

Press (n), and then ENTER
Press ctrl+alt+delete

Remove Hiren’s BootCD and Restart the Computer

Hack Window Password with Active Password Changer

• First Download Active Password Changer
• Start your computer and enter into Bios Setup.
• Change your boot preferences to boot from CD /DVD.
• Insert your Active Password Changer Bootable CD.

Press [1], Choose Windows system Disk Press Enter

Logical Drive Selection

If you have chosen the first option on Options screen you may select a particular volume to scan for SAM detection. Press Enter.

SAM Selection

If the only SAM database is detected, press [ENTER] to get users information

User Selection

After SAM database is scanned for all users the list of local users will be detected: Select your user Press Enter

Password Reset and changing account parameters

• After user account is chosen you see its information form SAM database:
• If you defined this user as a user you need to change settings and reset password, just  press [Y] to do that.
• You can also change default recommended settings and make your own choice. To choose desired option use arrows keys and [Space] key to mark or unmark it

To select and choose days and hours use arrow keys and [Space] bar. Please note that hours are pointed in GMT (Greenwich Mean Time) and you should take into accountyour time zone. NOTE: Default Windows system accounts may not have “permitted logon hours” options;

Press [Y] if you like to save your changes or press [Esc] to save account intact and  return to previous window (List of accounts)

How to use ERD Commander 2007 (Break Administrator Password)

1. Start your computer and enter into Bios Setup.
2. Change your boot preferences to boot from CD /DVD.
3. Insert your ERD Commander Bootable CD.
4. Once the ERD Commander starts booting it will ask you for Windows Installation, select appropriate installation for which you need to reset passwod

Once ERD is loaded it will present you a interface similar to windows.Click the START button, Select System Tools > and then select Locksmith.

Enter you new password and close Click Start Button again and restart the PC

Hack Remote Windows Passwords in Plain Text with WCE

Windows Credentials Editor (WCE) is a security tool that allows to list logon sessions and add, change, list and delete associated credentials (ex.: LM/NT hashes, plaintext passwords and Kerberos tickets). This tool can be used, for example, to perform pass-the-hash on Windows, obtain NT/LM hashes from memory (from interactive logons, services, remote desktop connections, etc.), obtain Kerberos tickets and reuse them in other Windows or Unix systems and dump cleartext passwords entered by users at logon. WCE is a security tool widely used by security professionals to assess the security of Windows networks via Penetration Testing. It supports Windows XP, 2003, Vista, 7 and 2008.

First Hack the Victim PC Using Metaspolit (Tutorial How to Hack Remote PC)

Step 1: Now upload the wce.exe in victim pc using

Upload /pentest/passwords/wce/wce.exe .

Step 2: type shell to get the command prompt of victim pc

Step 3: now use wce.exe –w command to get password in text form

How to Hack Admin Password from Guest Account

Command Prompt on Logon Screen

For XP User

Go to C:/windows-system32 Copy cmd.exe on your desktop

Rename it to sethc.exe. Now copy that file and paste again in system32 directory. When windows ask for overwriting the file, then click yes.

Now Log out from your guest account and at the user select window, press shift key 5 times or Left (ALT+Shift+ Num Lock).

For Windows 7 User

Right click on sethc.exe and run as administrator.

Right click on sethc.exe, Click on properties. and Click on Advanced tab

Now Select your Current user and click on Change Permissions

Now Click on Edit

Now Click on Full Control Check Box and Click OK

Copy  the New sethc.exe to system32, and click copy and replace

Now Restart your PC

Resetting the Password

Once you get to the login screen, hit the Shift key 5 times, and you’ll see an administrator mode command prompt.

Now to reset the password—just type the following command, replacing the username and password with the combination you want:

Command : net user account.name *
Example: net user raaz *
and hit enter. Set any password for that account

Break Windows Admin Password (Ophcrack Live CD)

Ophcrack is a free Windows password cracker based on rainbow tables. It is a very efficient implementation of rainbow tables done by the inventors of the method. It comes with a Graphical User Interface and runs on multiple platforms.

Features:

• Runs on Windows, Linux/Unix, Mac OS X, …
• Cracks LM and NTLM hashes.
• Free tables available for Windows XP and Vista.
• Brute-force module for simple passwords.
• Audit mode and CSV export.
• Real-time graphs to analyze the passwords.
• LiveCD available to simplify the cracking.
• Loads hashes from encrypted SAM recovered from a Windows partition, Vista included.
• Free and open source software (GPL).

First Download Ophcrack

Boot your pc with ophcrack LiveCD

Now your Password will be Automatically Bracked